What are the Eurocodes?
The Eurocodes are the ten European structural design standards, BS EN 1990 to BS EN 1999, that govern the basis of design, the loads a structure must resist and the design of concrete, steel, composite, timber, masonry and aluminium structures. In the UK each part is used with its National Annex, which sets the UK's own partial factors, climatic data and method choices. A calculation package should name every part and National Annex it applied, with the edition.
- Ten standards, BS EN 1990 to 1999
- Each used with its UK National Annex
- Replaced the British Standards withdrawn in 2010
- Every package we issue names the parts and editions applied
What the Eurocodes are
The Eurocodes are ten European structural design standards, EN 1990 to EN 1999, published in the UK by BSI as BS EN 1990 to BS EN 1999. Together they cover the basis of design, the actions a structure must resist, and the design of structures in concrete, steel, composite construction, timber, masonry and aluminium, together with geotechnical and seismic design.
Each part is used in the UK with its National Annex. The Eurocode gives the method; the National Annex gives the values and choices that are left to each country. A design to the Eurocodes in the UK is therefore always a design to a part and its UK National Annex together, and a calculation that names one without the other has not said what it did.
They replaced the British Standards that had governed UK structural design for decades. BSI withdrew the conflicting British Standards in 2010, among them BS 6399 for loading, BS 5950 for steel, BS 8110 for concrete, BS 5628 for masonry and BS 5268 for timber. Those documents remain legitimate for one purpose: appraising a structure that was designed to them, where the engineer has to know what the original designer was working to.
Which part governs what
BS EN 1990 sets the basis of design: limit states, partial factors, load combinations and the reliability the whole suite works to. BS EN 1991 covers actions, in parts: 1-1 densities, self-weight and imposed loads; 1-2 actions on structures in fire; 1-3 snow; 1-4 wind; 1-5 thermal; 1-6 actions during execution; 1-7 accidental actions; and further parts for traffic on bridges, cranes and machinery, and silos and tanks.
The material codes follow. BS EN 1992 concrete, BS EN 1993 steel, BS EN 1994 composite steel and concrete, BS EN 1995 timber, BS EN 1996 masonry and BS EN 1999 aluminium. BS EN 1997 covers geotechnical design and BS EN 1998 covers seismic design, which in the UK applies only to a small number of specialised structures.
A typical building calculation touches several of them at once: BS EN 1990 for the combinations, BS EN 1991-1-1, 1-3 and 1-4 for the loads, and one or more material codes for the members. The package should list every part and National Annex applied. A reader who cannot see that list cannot check the work, and a checker who has to guess the edition will not sign it.
The parts covered in detail on this site so far: BS EN 1990, basis of design; BS EN 1991-1-1, densities, self-weight and imposed loads; BS EN 1991-1-3, snow; BS EN 1991-1-4, wind; BS EN 1992-1-1, concrete; BS EN 1993-1-1, steel; and BS EN 1996-1-1, masonry. The withdrawn wind code has its own page: BS 6399-2. What an assessment of an existing building must establish, with the standards against each item, is set out in the Structural Assessment Specification.
What the National Annex changes
A Eurocode leaves certain decisions to each country. These Nationally Determined Parameters include the partial factors on loads and materials, the climatic data such as the wind and snow maps, and the choice between alternative methods where the Eurocode offers more than one. The UK National Annex records the UK's decisions on each of them.
The National Annex can also direct the designer away from a method in the Eurocode itself. The clearest example is wind. Clause NA.2.28 of the National Annex to BS EN 1991-1-4:2005+A1:2010 states that the Eurocode's own tables of external pressure coefficients for roofs should not be used in the UK, and replaces them with the National Annex's tables NA.5 to NA.8. The zone figures in the Eurocode are retained; the values are not. A roof checked with the European tables in the UK has used the wrong numbers.
Where the Eurocode is silent, the UK publishes non-contradictory complementary information alongside the National Annex. PD 6688-1-4:2009 is the background paper to the wind National Annex, and the PD 6688 series does the same for other parts. These documents are not optional reading: the National Annex cites them, and a wind calculation for an unusual form is often answered there and nowhere else.
Why the edition matters
The same clause number can say opposite things in two printings. In the 2008 printing of the National Annex to BS EN 1991-1-4, clause NA.2.28 made no national choice and referred the reader to an advisory note that recommended the method in BS 6399-2, a standard withdrawn in 2010. In the 2005+A1:2010 edition the same clause makes the national choice set out above. A calculation that cites "NA to BS EN 1991-1-4" without the amendment has not told its reader which of the two it followed.
This is why every calculation package we issue states the part, the year and the amendment of each document applied, together with the National Annex and its own amendment. It is a small discipline with a large consequence: it is the difference between a package a checker can reproduce and one they have to take on trust.
BSI is publishing a second generation of the Eurocodes progressively. Until the UK National Annex to a new part is published and the earlier part is withdrawn, the current part and its National Annex remain the basis of design. The documents named in a package are the documents it was designed to, and a reader should expect to see them named.
What replaced the British Standards
For loading: BS 6399-1 (dead and imposed loads) was replaced by BS EN 1991-1-1; BS 6399-2 (wind) by BS EN 1991-1-4; BS 6399-3 (imposed roof loads) by BS EN 1991-1-3 for snow with imposed roof loads now in BS EN 1991-1-1. CP3 Chapter V, which preceded BS 6399-2 for wind, is two generations behind and still appears on old drawings.
For materials: BS 5950 (steel) by BS EN 1993; BS 8110 (concrete) by BS EN 1992; BS 5628 (masonry) by BS EN 1996; BS 5268 (timber) by BS EN 1995; and the geotechnical codes BS 8002 and BS 8004 by BS EN 1997. We hold the withdrawn codes for one reason, which is appraising structures that were designed to them, and we never present them as current. The correction page on BS 6399-2 sets out the wind case in detail, because it is the one still cited most.
The Eurocodes and the Building Regulations
In England, and in Wales in some circumstances, Approved Document A is the guidance Building Control assesses structure against, and it points to the Eurocodes and their National Annexes as the route to compliance. In Scotland the equivalent is Section 1 of the Technical Handbooks under the Building (Scotland) Regulations, and in Northern Ireland Technical Booklet D. In each case the calculation package is what demonstrates compliance, and in each case it is read by someone who will look for the standards applied.
Our calculation packages are prepared to the Eurocodes with the UK National Annexes and state the parts applied. Where a structure was designed under an earlier code, the appraisal says so, assesses it against the current code, and reports the two findings separately, because "does not meet current code demand" and "unsafe" are different conclusions. See structural calculations for Building Control, wind and snow loading assessment and independent checking.
Documents cited
- BS EN 1990, Eurocode: Basis of structural design, with the UK National Annex.
- BS EN 1991-1-4:2005+A1:2010, Eurocode 1: Actions on structures, Part 1-4: General actions, Wind actions.
- NA to BS EN 1991-1-4:2005+A1:2010, UK National Annex to Eurocode 1, Part 1-4, incorporating National Amendment No. 1, clause NA.2.28 and Tables NA.5 to NA.8.
- NA to BS EN 1991-1-4:2005, 2008 printing, clause NA.2.28 and its advisory note, cited as the example of an edition that must be named.
- PD 6688-1-4:2009, Background information to the National Annex to BS EN 1991-1-4 and additional guidance.
- Approved Document A: Structure (England; Wales in some circumstances).
Common questions
Are the Eurocodes mandatory in the UK?
Building Regulations do not name a standard as mandatory, but the guidance Building Control assesses against, Approved Document A in England, points to the Eurocodes and their UK National Annexes as the route to compliance, and the British Standards they replaced were withdrawn in 2010. In practice a new design is prepared to the Eurocodes.
What is a National Annex?
The document in which each country records its decisions on the parameters a Eurocode leaves open: partial factors, climatic maps and choices between methods. In the UK it can also direct the designer to use the National Annex's own data in place of the Eurocode's, as clause NA.2.28 of the wind National Annex does for roof pressure coefficients.
Can an existing building be assessed to BS 5950 or BS 8110?
An appraisal can and often should establish what the original designer worked to, and the withdrawn codes are the way to do that. The assessment of whether the structure is adequate today is made against the current Eurocodes, and the report keeps the two findings separate.
Why does a calculation package list the editions?
Because the same clause number can carry different content in different printings, and a checker, a Building Control officer or a funder's engineer needs to be able to open the same document and follow the same route. A package that names its parts, years and amendments can be reproduced; one that does not has to be taken on trust.
Related services and resources.





Tell us what you are building.
Send the drawings or describe the project. We confirm scope, deliverables and a realistic timescale.
Start a project